Sauna installatie checklist

Technical room

Please note that the relay box and control of the sauna and infrared cabin must always remain accessible. Place these in a technical room or for example behind a service hatch on top of the cabin.

Floor & Drain

A small opening is kept under the door of the sauna to allow air to be sucked in. Do not place a drain in a sauna room; the heat will dry the drain. Make sure the floor is level; an uneven floor will result in dimensional deviations.

Required technical facilities

The technical facilities differ from sauna to sauna and infrared cabin. All necessary facilities are specified in the quotation/order.

Electricity supply

Calculation of the power of the sauna heater: cabin length x width x height x 1.25.

For a sauna heater up to 3.6 kW, a 230V connection is sufficient. From 4.5 kW, 400 V or 2 x 230V is required. Depending on the chosen heater and lighting, it must be determined whether the lighting is controlled by the sauna heater or whether a second power supply for the lighting is necessary. There must always be a work switch. We are happy to advise you on this.

Hygiene and maintenance

By using a towel you prevent sweat drops from falling on your benches. To preserve your stove: replace your sauna stones every few years when using them regularly, do not stuff them in the stove and do not pile them high on the stove.

Warranty

For normal private use 2 years on the cabin excluding glass door/windows and lamps. Sauna heater and electronics 2 years, except for the heating elements, because their lifespan is strongly dependent on how the heater is treated.