Technical Information

NECESSARY TECHNICAL FACILITIES

Always read the manual before installation;

When installing a Cleopatra whirlpool, it is important that air can come from a heated area to under the tub. For any service work, a drain should be installed at the level of the spa blower/pump. service hatch (min. 500 x 500 mm) should be present. Please note that the creation of a service hatch, if invisible or not, is necessary to provide maintenance and service. In addition, the electrical connection 230V and water supply must be in accordance with regulations.

Spa blower: 800 W
Hydro pump: 1150 W
Hydro heating: 1500 W/2000 W*
Oxynation O2: 1350 W

For a combined system, add up the capacities. The use of combined systems can lead to an additional service hatch; please be informed about this. *The larger capacities apply to baths with volumes > 400 liters.

WARRANTY

All Cleopatra baths, whirlpools and faucets come standard with a 2-year manufacturer's warranty.

CLEOPATRA AND COLOR

All baths and whirlpools are available in the usual sanitary color: white. The fittings and visible parts are standard in the color chrome, optionally available in special finishes.

HYGIENE

Cleopatra whirlpools have two important features that provide maximum hygiene without adding chemicals. The water hoses connected to the hydro jets empty and ensure that all the water drains out of the hoses. In addition, all the water is automatically blown out of the air system after taking a bath (afterglow function). We recommend taking a shower before using a whirlpool system. This way, less hair and dirt will enter the system.

USE BATH OILS AND CLEANER

Cleopatra bath oils are specially developed for use in the bath and in combination with a whirlpool system.

You can clean the whirlpool system with the appropriate whirlpool cleaner. After bathing, you can add the cleaner to the bath and operate the system again.