Whirlpool Cleaner | 1 Liter

WHIRLPOOL CLEANER

The Cleopatra whirlpool cleaner has been specially developed for cleaning heavily soiled whirlpool systems. It loosens and smoothes out stuck parts in the system. Blocked pipes and drains are opened up again. The whirlpool cleaner is safe for the whirlpool system and is suitable for use both at home and in the professional environment. Content is 1 liter per bottle. Depending on the intensity of use and water hardness, we recommend cleaning the whirlpool system at intervals of 4 to 6 weeks.

USER MANUAL

Instructions for use for whirlpools without an automatic cleaning system:
1. Fill the bath with warm water with a minimum temperature of 35°C.
2. Pour approximately 200 ml. WhirlpoolCleaner into the water (mixing ratio 200 ml. to 100 ltr. of water).
3. Close (if equipped) the air regulator or mass pressure regulator and start the whirlpool system. Allow the system to operate for approximately 5 minutes so that the WhirlpoolCleaner mixes well with the bath water.
4. Stop the whirlpool system and allow it to take effect for at least 10 hours.
5. Allow the whirlpool system to operate for another 5 minutes.
6. Drain the water and, if necessary, refill the tub with cold water for a rinse. This is only necessary if the whirlpool is severely soiled.
7. Rinse out empty container before disposing of according to existing regulations.

Caution! During the cleaning cycle, you should definitely not use the bath.